Limescale, soap scum, and stubborn watermarks are common problems in bathrooms and kitchens, especially in areas with hard water. Limescale Remover is a powerful, ready to use surface cleaning spray designed to remove even the toughest mineral deposits while protecting your surfaces. When used regularly, it keeps surfaces clean, shiny, and free from recurring limescale buildup.

This guide explains how to use Limescale Remover safely and effectively, along with its key benefits and answers to frequently asked questions.

What Is Limescale Remover?

Limescale Remover is a high performance cleaning solution formulated to eliminate:

• Limescale deposits.
• Soap scum.
• Watermarks.
• Light corrosion and oxide buildup.

Its advanced formula contains active corrosion inhibitors that help prevent flash rusting and extend the life of metal surfaces. The product is biodegradable, easy to use, and suitable for most common metal surfaces such as steel and aluminium.

Key Features and Benefits

• Biodegradable and environmentally considerate.
• Ready to use liquid formula.
• Effectively removes limescale, rust, and oxide buildup.
• Contains active corrosion inhibitors.
• Helps extend the lifespan of affected surfaces.
• Safe on steel and aluminium.

How to Use Limescale Remover

Follow these steps for best results:

Step 1: Apply the Product

Apply the Limescale Remover directly onto the surface or onto a sponge or cloth used for cleaning.

Step 2: Allow It to Work

For light deposits, wipe immediately. For tougher limescale or encrustations, leave the product on the surface for up to 5 minutes.

Step 3: Rinse Thoroughly

Rinse the surface well with clean water to remove all residues.

Step 4: Repeat if Necessary

For heavy buildup, repeat the process until the desired results are achieved.

Special Application for Rust Removal

• For rust on paintwork, dilute the product at a ratio of 1 part product to 5 parts water.
• Apply using a brush or spray.
• Leave for 10–20 minutes.
• Rinse thoroughly with water.
• Gentle brushing may be required for stubborn rust.

Active Ingredients

• Aqua (CAS No. 7732-18-5).
• Sulfamic Acid (CAS No. 5329-14-6).
• Di-carboxylic Acid (CAS No. 499-83-2).
• Surfactants (CAS No. N/A).

pH: Less than 2 at 20°C.
Physical State: Liquid.
Colour: Light Green.
Odour: Distinct.

Storage and Packaging

• Store in a cool, dry place.
• Keep unopened containers at 8°C to 28°C (46°F to 82°F).
• Do not return unused material to the original container.

Available Packaging Sizes

• 6 Litres.
• 10 Litres.
• 200 Litres.

Safety Instructions

• Avoid contact with skin and eyes.
• Wear protective gloves during use.
• In case of eye contact, rinse immediately with plenty of water and seek medical advice.
• If swallowed or if you feel unwell, seek medical assistance immediately.
• Always refer to the MSDS before handling or use.

Frequently Asked Questions (FAQs)

Can Limescale Remover be used daily?

Yes, regular use is safe on recommended surfaces and helps prevent the return of limescale.

Is this product safe for metal surfaces?

Yes, it is safe for steel and aluminium and contains corrosion inhibitors to protect metal surfaces.

Can I use it on marble or natural stone?

No, this product should not be used on natural stone such as marble, as it is acid-sensitive.

Does Limescale Remover remove rust?

Yes, it helps remove rust and oxide buildup. For best results on paintwork, use the recommended dilution.

Is the product environmentally friendly?

Yes, the formulation is biodegradable when used as directed.

Conclusion

Limescale Remover is a reliable and effective solution for tackling stubborn limescale, soap scum, and watermarks in bathrooms and kitchens. Its powerful yet surface respecting formula ensures thorough cleaning while helping to prevent future buildup. With regular use and proper application, this product keeps surfaces clean, shiny, and well maintained, making it an essential part of any professional or household cleaning routine.